How to Twist in and Drown out
1. FIND YOUR FIT- Sizes 2,4,6,8
Start small. Move up a size if needed. Be Goldilocks- find the seals that are just right! Fit is Key!
2. HANDLING SEALS - Left Hand Example
Place thumb on the ‘L’ flat side of the seal and support with other fingers as needed near the seal face.
3. PUTTING THEM IN
Start with the exit hole toward the bottom, Then place in your ear canal.
4. TESTING YOUR COMFORT
Begin with the acoustic seal rotated slightly forward. Then push into your ear as you rotate backward for the feeling of being locked in place. the ‘tail’ should be snug against the Concha Cymba.
5. ALIGN WITH EARPIECE
When you’ve found a comfortable seal, take out and Locate the “L” on the back of the earpiece and seal to line up with the earpiece.
6. SNAP IN PLACE
Push into the earpiece to snap in place.
7. TWIST AND LOCK IN PLACE
Place in ear with the Acoustic seal attached to the earpiece. Move the cable around the back of ear for added comfort. Repeat on the other ear!
8. ATTACH BOOM MIC- Optional!
9. DROWN OUT
Be kind to your ears! Always start on Low Volume. Then Turn up to the loudest comfortable level. If you have different size ears use the seal sized to fit properly. If one side is louder than the other, use the smaller seals in both ears.